5.1. Module 2 Settings
5.1. Module 2 Settings
These settings allow flexible configurations for pipe shoes and supports in Plant 3D.
| Name |
|---|
| AllowReversePipeShoe |
| Value |
| 1 |
| Note |
| 0 - Off 1 - On |
| Feature |
| Turbo Tools |
| Description |
| This option allows pipe shoes to be placed in a reversed orientation, providing additional flexibility in the design and placement of support systems. This is particularly helpful in situations with space constraints or specific orientation requirements. |
| Name |
|---|
| MTOTotalHeightOutput |
| Value |
| 2 |
| Note |
| 1 - TOP 2 - COP 3 - BOP |
| Feature |
| MTO Heights |
| Description |
| This option allows you to define how the height of pipe shoes is output in reports. You can choose between different reference points: Top of Pipe (TOP), Center of Pipe (COP), or Bottom of Pipe (BOP). |
| Name |
|---|
| SpaceAboveStructure |
| Value |
| 500 |
| Note |
| Any Integers |
| Feature |
| Turbo Tools |
| Description |
| This option is used in Turbo Tools to identify pipes in the automatic selection for multiple supports that are located above a structure and whose height is below a defined value. it enables fast and precise filtering of support points based on the relative position of the pipes. |
| Name |
|---|
| SpaceBelowStructure |
| Value |
| 5000 |
| Note |
| Any Integers |
| Feature |
| Turbo Tools |
| Description |
| This option is used in Turbo Tools to identify pipes in the automatic selection for multiple supports that are located below a structure and whose height is below a defined value. It provides a fast and efficient way to filter support points based on the relative position of pipes. |
| Name |
|---|
| MTOSplitClampRow |
| Value |
| 1 |
| Note |
| 0 - No split: Clamp information remains in the same row as the associated support. 1 - Split: Clamp information is output in a separate row. |
| Feature |
| MTO |
| Description |
| This option is used when using the MTO export function to determine whether clamp information should be split into a separate row from the supports or not. Two options are available: 0 - No split: Clamp information remains in the same row as the associated support. 1 - Split: Clamp information is output in a separate row. |
| Name |
|---|
| TurboToolsSupportInfo |
| Value |
| PartFamilyLongDesc |
| Note |
| - PartFamilyLongDesc - PartSizeLongDesc - ShortDescription |
| Feature |
| Turbo Tools |
| Description |
| When using Turbo Tools, you can set what type of information about the support should be displayed. The available options are: PartFamilyLongDesc: Displays the detailed description of the support's component family. PartSizeLongDesc: Displays the detailed description of the support's component size. ShortDescription: Displays a short description of the support. |
| Name |
|---|
| MTOArticleDescription |
| Value |
| PartSizeLongDesc |
| Note |
| - PartFamilyLongDesc - PartSizeLongDesc - ShortDescription |
| Feature |
| MTO |
| Description |
| When exporting MTO data, you can specify in the "Article Description" column what type of information should be inserted. The following options are available: PartFamilyLongDesc: Detailed description of the component family. PartSizeLongDesc: Detailed description of the component size. ShortDescription: Short description of the article. |
| Name |
|---|
| MTOForBG |
| Value |
| 1 |
| Note |
| 0 - Completed item: The item is treated as a finished component. 1 - Completed item with additional rod thread: The item is treated as a finished component with an additional rod thread. 2 - Single parts: The item is broken down into its individual parts. |
| Feature |
| MTO |
| Description |
| When exporting MTO data, you can specify how items from assemblies (Sikla) are treated. The following options are available: 0 - Completed component: The item is treated as a finished component. 1 - Completed component with additional threaded rod: The item is output as a finished component with an additional threaded rod. 2 - Individual parts: The item is broken down into its individual parts. |
| Name |
|---|
| MTOInlayLength |
| Value |
| 10 |
| Note |
| 1 - 1M 10 - 10M X - XM |
| Feature |
| MTO |
| Description |
| This setting defines the calculation method for inlay tapes, which are standardly ordered in meter rolls. The circumferences of the inlay tapes are calculated, and if the total length exceeds the limit of 1M or 10M defined in the option, the quantity in the parts list is increased accordingly. The options are: 1 - 1M: The circumferences of the inlay tapes are calculated. If the total length exceeds 1 meter, the quantity in the parts list is adjusted accordingly. 10 - 10M: The circumferences of the inlay tapes are calculated. If the total length exceeds 10 meters, the quantity in the parts list is adjusted accordingly. X - XM: The length of the inlay tapes is set individually. If the defined limit is exceeded, the quantity is adjusted accordingly. This function allows precise control over the calculation and representation of inlay tapes based on their total length and the specified options. |
| Name |
|---|
| ItemCodeDelimiter |
| Value |
| + |
| Note |
| + - _ |
| Feature |
| Dynamic Properties |
| Description |
| This option belongs to the Dynamic Properties function and allows for the combination of article numbers for the clamp and pipe shoe. The connecting character between the article numbers can be replaced by any other character. Example: 110349 + 110345 If this field remains empty, the article number of the pipe shoe is adopted unchanged. |
| Name |
|---|
| ForceSameSupport |
| Value |
| 2 |
| Note |
| 0 - Can place the next available support/clamp: Automatically places the next suitable support or clamp. 1 - Can only place the selected support/clamp: Only the previously selected support or clamp is used. 2 - Can place a similar type of the selected support/clamp: Similar supports or clamps of the same type can be used. |
| Feature |
| Turbo Tools |
| Description |
| This option belongs to the Turbo Tools function and is used for multiple placement. it determines whether only the same support/clamp that was selected should be placed, or if alternatives can also be used. The available options are: 0 - Can place the next available support/clamp: The next matching support or clamp is automatically used. 1 - Can only place the selected support/clamp: Only the previously selected support or clamp is used. 2 - Can place similar types of the selected support/clamp: Similar supports or clamps of the same type can be used. |
| Name |
|---|
| SuNoFormat |
| Value |
| SU{FreeNumber} |
| Note |
| Example these name are valid: {Tag}-SU{FreeNumber} {Tag}-{NominalDiameter}-SU{FreeNumber} SU{FreeNumber} SUNumber{FreeNumber} |
| Feature |
| Append |
| Description |
| Valid name examples: {Tag}-SU{FreeNumber} {Tag}-{NominalDiameter}-SU{FreeNumber} SU{FreeNumber} SUNumber{FreeNumber} Explanation: {Property}: Any property such as Tag, NominalDiameter, etc. (Optional). SU/SUNumber: Any text (Optional). FreeNumber: A free SU number (Required field, must be included). |
| Name |
|---|
| SiklaOverrule |
| Value |
| 1 |
| Note |
| 0 - Off 1 - On |
| Feature |
| Used for automatic property adjustment during a parameter change of SupportTemp, SupportHeight, or SupportType. Additionally, it controls that no sliding plates may be used for certain pipe shoes or clamp systems. |
| Description |
| This option disables or enables a specific override function for Sikla. 0 - Off: The specific override is disabled. 1 - On: The specific override is enabled. Note: Updating this value requires a restart of Plant 3D. |
| Name |
|---|
| ExportAttribute |
| Value |
| Tag, LineNumberTag, PartSizeLongDesc |
| Note |
| from left to right is the map attribute from 01 to 10 |
| Feature |
| Command SuCri2ExportPrimarySupport |
| Description |
| This option is used in the SuCri2ExportPrimarySupport function to export supports to Advance Steel as special components. Attributes are mapped from left to right in the order from 01 to 10. |
| Name |
|---|
| LimitClampInCurrentSpec |
| Value |
| 0 |
| Note |
| 0 - No 1 - Yes |
| Feature |
| Turbo Tools |
| Description |
| This option belongs to the Turbo Tools -> Clamp System function and limits the selection of possible clamps to those present in the current specification: 0 - No: Clamps can be selected regardless of the current specification. 1 - Yes: Selection is limited to clamps defined in the current specification. |
| Name |
|---|
| ForceOverwriteDynamicProp |
| Value |
| 0 |
| Note |
| 0 - No 1 - Yes |
| Feature |
| Dynamic Properties |
| Description |
| This option belongs to the Dynamic Properties function and determines whether the clamp system data should always be written to the properties: 0 - No: Clamp data is not written to properties by default. 1 - Yes: Clamp data is always written to properties. Note: Disabling this option can lead to inconsistent MTO data and should therefore only be used in very specific scenarios. |
| Name |
|---|
| SupportLayer |
| Value |
| SuCri_Supports |
| Note |
| - Default: use default setting from project - SuCri_Supports: use layer name "SuCri_Supports" for SuCri supports. |
| Feature |
| Used when placing supports from the pipe spec |
| Description |
| This option defines the layer setting for SuCri supports: Default: Uses the default layer setting from the project. SuCri_Supports: Uses the layer name "SuCri_Supports" for SuCri supports. Note: Updating this value requires a restart of Plant 3D. |
| Name |
|---|
| RestrictParameterForVendor |
| Value |
| Sikla, Hilti |
| Note |
| Sikla |
| Feature |
| Used when you want to change a parameter |
| Description |
| The support parameters of these manufacturers are restricted according to the RestrictTable table. If a parameter is restricted, it cannot be edited in the model. Note: Updating this value requires a restart of Plant 3D. |
| Name |
|---|
| KeepPropertiesForSupports |
| Value |
| Tag, SuNo |
| Note |
| Tag, SuNo |
| Feature |
| Turbo Tools |
| Description |
| This option belongs to the Turbo Tools -> Support function. When the auto-select support function is used to replace an existing support with a new one, the specified values for the new support are retained. |
| Name |
|---|
| SuNoFreeNumber |
| Value |
| 3 |
| Note |
| 2-00 to 99 3-100 to 999 ... |
| Feature |
| Append |
| Description |
| Specifies how many digits to use when formatting the SuNoFreeNumber, including any necessary leading zeros, e.g., a value of 2 displays numbers from 00-99. A value of 3 displays numbers from 000-999, etc. |