Skip to Content
  • German
  • Sign in
IntegaDesign GmbH
  • Home
  • Products
    SuCri® SuCri® Pipe support & steel planning PiCri PiCri New Piping automation Content Packs Plant 3D™ Content Packs Python-based part catalogs SpecCheck Plant 3D™ SpecCheck Automated specification check Stahlbaukataloge Plant 3D™ structural catalogs International structural catalogs
    Request a free consultation
  • Services
    Plant 3D™ capacity Plant 3D™ experts on a project basis Plant 3D™ project administration Projects, iso styles, catalogs Plant 3D™ optimisation Automation & workflow consulting Plant 3D™ programming Python & C# plug-ins Plant 3D™ emergency support Fast help with time-critical problems
    Request a free consultation Emergency support
  • Training
    Plant 3D™ training User and administrator courses SuCri® training Pipe supports and steel structures in Plant 3D™ PiCri training Piping toolbox in Plant 3D™
    Request a free consultation
  • Veranstaltungen
  • Downloads
  • Blog
  • Knowledge Base
    SuCri® SuCri® Knowledge Base PiCri PiCri Knowledge Base SpecCheck SpecCheck Knowledge Base
    Request a free consultation
  • Company
    About us Learn more about IntegaDesign References Our partners and customers Contact Talk to us
    Request a free consultation
  • Request a consultation
IntegaDesign GmbH
      • Home
      • Products
      • Services
      • Training
      • Veranstaltungen
      • Downloads
      • Blog
      • Knowledge Base
      • Company
    • +49 6103 7329244
    • English (UK) Deutsch
    • Sign in
    SuCri® Knowledge Base 4. Calculation of the screw length 4.5 Calculation of wafer-type screws (WF) 4.5.22. Display Front View (SuCri4ShowSUFrontView)
    SuCri-User Guide (EN)
    • 1. Introduction to SuCri
      • 1.1 Supported versions
      • 1.3. Key Terminology
      • 1.4. Request trial version
    • 2. First Steps
      • 2.1. System requirements
      • 2.2. Installation instructions
        • 2.2.1. Module 1
        • 2. Installation
        • 2.2.3. Module 3 (P3D)
        • 2.2.4. Module 3 (ADVS)
        • 2.2.5. Module 4
        • 2.2.6. Module 5
        • 2.2.7. Uninstalling modules correctly
        • 2.2.8. Installation for enterprise customers
      • 2.3. First execution
    • 3. Overview of the Ribbon
      • 3.1. Module 1
      • 3.2. Module 2
      • 3.3. Module 3 (P3D)
      • 3.4. Module 3 (ADVS)
      • 3.5. Module 4
      • 3.6. Module 5
    • 4. Calculation of the screw length
      • 4.1. Module 1
        • 4.1.1. Automatic nominal diameter check
        • 4.1.2. Automatic connection check
        • 4.1.3. Sliding plates and insert strips
        • 4.1.4. Dynamic height adjustment
        • 4.1.5. Dynamic clamping systems
        • 4.1.6. Changing support heights and support types
        • 4.1.7. Structural steel profiles from the pipe class
        • 4.1 Commands
      • 4.2 Drawing selection
        • 4.2.2. Selection (SuCri2SelectSupport)
        • 4.2.3. Replace [DWG] (SuCri2ReplaceExistingSupportDWG)
        • 4.2.4. Bracket (SuCri2AutoSelectSupport)
        • 4.2.5. Export supports (SuCri2ExportPrimarySupport)
        • 4.2.6. Bracket [x] (SuCri2AutoSelectMultipleSupport)
        • 4.2.7. Info (SuCri2SupportXdata)
        • 4.2.8. Clamping system [x] (SuCri2AutoSelectMultipleClamp)
        • 4.2.9. Clamping system (SuCri2AutoSelectClamp)
        • 4.2.10. Detach (SuCri2DetachSupport)
        • 4.2.11. Mount + clamping system (SuCri2AutoSelectSupportClamp)
        • 4.2.12. Align Faces (SuCri2AlignFace)
        • 4.2.13. Attach Double Support (SuCri2AttachDoubleSupport)
        • 4.2.14. Appending with Reference (SuCri2AttachSupportWithRef)
        • 4.2.15. Automatic Plates (SuCri2AutoAddPlate)
        • 4.2.16. Automatic Screws (SuCri2AutoAddScrewForPlate)
        • 4.2.17. Bracket + Clamping System [x] (SuCri2AutoSelectMultipleSupportClamp)
        • 4.2.18. Creating Dummy Parts (SuCri2CleanDummyParts)
        • 4.2.19. Detach all Xrefs (SuCri2DetachAllXref)
        • 4.2.20. Release Double Support (SuCri2DetachDoubleSupport)
        • 4.2.21. Detach Xref (SuCri2DetachXref)
        • 4.2.22. Dynamic properties [DWG] (SuCri2DynamicPropertiesDWG)
        • 4.2.23. Dynamic Property [PRJ] (SuCri2DynamicPropertiesProject)
        • 4.2.24. Export selected supports (SuCri2ExportPrimarySupportForSelection)
        • 4.2.25. MTO [DWG] (SuCri2GetReportActiveDrawing)
        • 4.2.26. MTO [PRJ] (SuCri2GetReportAllDrawing)
        • 4.2.27. MTO Heights [DWG] (SuCri2GetTotalHeight)
        • 4.2.28. MTO Heights [PRJ] (SuCri2GetTotalHeightAllDrawing)
        • 4.2.29. Configuring Dynamic Properties (SuCri2LoadDynamicProperty)
        • 4.2.30. Load Settings (SuCri2LoadSetting)
        • 4.2.31. MTO [DWG] MPSS (SuCri2MPSSMTOExportDWG)
        • 4.2.32. MTO [PRJ] MPSS (SuCri2MPSSMTOExportProject)
        • 4.2.33. Option Switch for Multiple Item Numbers (SuCri2MultiPosNumbers)
        • 4.2.34. Load Language Mapping (SuCri2OpenLanguageMapping)
        • 4.2.35. Replace [PRJ] (SuCri2ReplaceExistingSupportProject)
        • 4.2.36. Reversing screws (SuCri2ReverseMPSSBolt)
        • 4.2.37. Selection Double Support (SuCri2SelectDoubleSupport)
        • 4.2.38. Clamping system Xref [x] (SuCri2SelectMultipleClampFromRef)
        • 4.2.39. Holder + Clamping System Xref [x] (SuCri2SelectMultipleSupportClampFromRef)
        • 4.2.40. Holder Xref [x] (SuCri2SelectMultipleSupportFromRef)
        • 4.2.41. Snap Point Option Switches (SuCri2SupportSnapPoint)
        • 4.2.42. Convert Selected Profiles to Spec Profile (SuCri2SwitchProfileStructure)
        • 4.2.43. Convert Profiles to Spec Profiles [DWG] (SuCri2SwitchProfileStructureDrawing)
        • 4.2.44. Update dummy parts (SuCri2UpdateDummyParts)
        • 4.2.45. Spec Properties [DWG] (SuCri2UpdateDWGPropertiesFromSpec)
        • 4.2.46. Spec Properties [PRJ] (SuCri2UpdatePropertiesFromSpec)
        • 4.2.47. Option switch for license pull behavior (SuCriAutoPullLicense)
        • 4.2.48. Send crash report (SuCriSendSupportRequest)
        • 4.2.49. Open Error Log File (SuCriShowLog)
      • 4.3 Configuration Data – BoltLengthCalculation.json
        • 4.3.1. Update all blocks in active DWG (SuCri3BatchUpdateBlocks)
        • 4.3.2. Updating all connections in active DWG (SuCri3BatchUpdateConnections)
        • 4.3.3. Place axis system on drawing (SuCri3DrawGridToLayoutPlan)
        • 4.3.4. Export anchor list (SuCri3ExportAnchors)
        • 4.3.5. Import Supports (SuCri3ImportSupports)
        • 4.3.6. Move connection (SuCri3MoveConnection)
        • 4.3.8. Option switch for weld seam (SuCri3SetAutoWeld)
        • 4.3.9. Defining the axis reference (SuCri3SetGridReference)
        • 4.3.10. Update Item Numbers (SuCri3SetItemCodes)
        • 4.3.11. Placing a Location Point (SuCri3SetLocationPoint)
        • 4.3.12. Option switch for profile connection to main profile (SuCri3SetProfilesWeldedTogether)
        • 4.3.13. Tolerance setting (SuCri3SetTolerance)
        • 4.3.14. Open Error Log (SuCri3ShowLog)
        • 4.3.15. Open connection dialog (SuCri3ShowSelectConnection)
        • 4.3.16. Update Location Point (SuCri3UpdateLocationPoint)
        • 4.3.7. Reload SuCri Resources (SuCri3ReloadData)
        • 4.3.17. Check profile lengths (SuCri3ValidateProfileLength)
      • 4.4 Calculation formula
        • 4.4.1. Updating all blocks in active DWG (SuCri3BatchUpdateBlocks)
        • 4.4.2. Update all connections in active DWG (SuCri3BatchUpdateConnections)
        • 4.4.3. Place axis system on drawing (SuCri3DrawGridToLayoutPlan)
        • 4.4.4. Export anchor list (SuCri3ExportAnchors)
        • 4.4.5. Import Supports (SuCri3ImportSupports)
        • 4.4.6. Move connection (SuCri3MoveConnection)
        • 4.4.7. Reload SuCri Resources (SuCri3ReloadData)
        • 4.4.8. Option switch for weld seam (SuCri3SetAutoWeld)
        • 4.4.9. Setting the Axis Reference (SuCri3SetGridReference)
        • 4.4.10. Update Item Numbers (SuCri3SetItemCodes)
        • 4.4.11. Placing a Location Point (SuCri3SetLocationPoint)
        • 4.4.12. Option switch for profile connection to main profile (SuCri3SetProfilesWeldedTogether)
        • 4.4.13. Tolerance setting (SuCri3SetTolerance)
        • 4.4.14. Open Error Log (SuCri3ShowLog)
        • 4.4.15. Open connection dialog (SuCri3ShowSelectConnection)
          • 4.4.15.1. Place connections
          • 4.4.15.2. Free End Connection
          • 4.4.15.3. Joint connection
          • 4.4.15.4. Connection collision
          • 4.4.15.5. Connection crossing
        • 4.4.16. Update Location Point (SuCri3UpdateLocationPoint)
        • 4.4.17. Check profile lengths (SuCri3ValidateProfileLength)
        • 4.4.18. Update or copy connection
        • 4.4.19. Deleting a connection
      • 4.5 Calculation of wafer-type screws (WF)
        • 4.5.1. Attaching (SuCri4AttachSupport)
        • 4.5.2. Attaching with reference (SuCri4AttachSupportWithRef)
        • 4.5.3. Update Scale of All Views (SuCri4ChangeAllViewScale)
        • 4.5.4. Change the scale of the selected view (SuCri4ChangeViewScale)
        • 4.5.5. Check whether drawing was created with SuCri (SuCri4CheckSuCriDrawing)
        • 4.5.6. Detach all Xrefs (SuCri4DetachAllXref)
        • 4.5.7. Detaching (SuCri4DetachSupport)
        • 4.5.8. Detach Xref (SuCri4DetachXref)
        • 4.5.9. Hide all centerlines on the drawing (SuCri4HideAllCenterLine)
        • 4.5.10. Load Settings (SuCri4LoadSetting)
        • 4.5.11. Label view with Ortho Annotations (SuCri4PlantOrthoAnnotate)
        • 4.5.12. Create single drawing (SuCri4PlantOrthoCreateMultiple)
        • 4.5.13. Create multiple drawings (SuCri4PlantOrthoCreateMultipleSU)
        • 4.5.14. Labeling the View with Custom Annotations (SuCri4PlantOrthoCustomAnnotate)
        • 4.5.15. Dimension view (SuCri4PlantOrthoDimension)
        • 4.5.16. Defining Drawing Areas (SuCri4PlantOrthoDrawArea)
        • 4.5.17. Refresh view (SuCri4PlantOrthoDrawArea)
        • 4.5.18. Update all views (SuCri4PlantOrthoUpdateAllView)
        • 4.5.19. Defining the Front View (SuCri4SelectFrontView)
        • 4.5.20. Selection (SuCri4SelectSupport)
        • 4.5.21. Setting the Scale of a View (SUCRI4SetOrthoScale)
        • 4.5.22. Display Front View (SuCri4ShowSUFrontView)
        • 4.5.23. Info (SuCri4SupportXdata)
        • 4.5.24. Option switch for displaying the Orthocube (SuCri4ShowOrthoCube)
      • 4.6 Excel report
    • 5. Numbering (Weld seam / Spool / Part)
      • 5.1. Module 2 Settings
      • 5.2. Module 3 Settings
      • 5.3. Module 4 Settings
    • 6. AutoRouting
      • 6.1. Daily tasks
      • 6.2. Advanced Tasks
      • 6.3. Example Scenarios
    • 7. Clip-Box
      • 7.1. Installation and Setup
        • 7.1.1. Access to license management
        • 7.1.2. Behavior after the SuCri test phase has expired
      • 7.2. Module 1
        • 7.2.1. Pipe clamps and pipe classes – note on DIN dimensions
        • 7.2.2. Different geometries when inserting components from the tool palette
      • 7.3. Module 2
        • 7.3.1. What does the ForceOverwriteDynamicProp setting do
        • 7.3.2. Combining Plant 3D and Advance Steel – Handling Changes in Steel Construction
        • 7.3.3. How can I display additional columns in the MTO?
        • 7.3.4. Output of Threaded Rod Lengths (Setting MTOForBG)
        • 7.3.5. How can I display the MTO in a different language?
      • 7.4. Module 3 (P3D)
        • 7.4.1. Storage location for custom block components
        • 7.4.2. How can I work with profiles that are not supported
        • 7.4.3. Where can I see which connections are available?
      • 7.5. Module 3 (ADVS)
        • 7.5.1. Negative part numbers in Advance Steel
        • 7.5.2. Storage location of the SuCri Patcher
        • 7.5.3. Storage location for custom Special Parts
        • 7.5.4. Display line number and SupporTag as a label
        • 7.5.5. Assembly designations are not entered into the other parts
        • 7.5.6. How the individual connections are used and with which extension
        • 7.5.7. How can I work with profiles that are not supported
        • 7.5.8. Where can I see which connections are available?
      • 7.6. Module 4
        • 7.6.1. How can I round dimensions to one decimal place
        • 7.6.2. How can I adjust the cell height of the bill of materials
        • 7.6.3. How can I display the total weight of the assembly?
        • 7.6.4. How can I display the SuNo as a property in the title block?
        • 7.6.5. How can I set the view headings to German
        • 7.6.6. How can I hide the viewport frame
        • 7.6.7. How do I handle my own blocks?
        • 7.6.8. How can I change the SuNo format?
        • 7.6.9. MTO on the drawing – incorrect representation of profiles
        • 7.6.10. Automatic annotations in views and isos
        • 7.6.11. Plant 3D fasteners in secondary steelwork
        • 7.6.12. Display line number and SupporTag as labels
      • 7.7. Module 5
    • 8. Tools
      • 8.4 Module 3 (P3D)
      • 8.1. Performance problems
      • 8.2. Module 1
        • 8.2.1. Error message: “Can’t find symbol for specified part”
        • 8.2.2. Error message: "Can't find module vormain"
        • 8.2.3. Error message: "ImportError: DLL load failed"
        • 8.2.4. Missing images in the tool palette for SuCri components
      • 8.3. Module 2
        • 8.3.1. Surface no longer visible
        • 8.3.2. No suitable clamping system found at TurboTools
        • 8.3.3. Dynamic properties are reset
        • 8.3.4. Missing information on clamping systems in isometrics
        • 8.3.5. Isometry shows only a star symbol for supports
        • 8.3.6. Turbo tools do not place components
        • 8.3.7. No suitable holder found at TurboTools
      • 8.5. Module 3 (ADVS)
        • 8.5.1. Problem with decimal separators in ADVS 2026 report generation
        • 8.5.2. Problem when importing supports between different SuCri versions
        • 8.5.3. Problem connecting Sikla-Pressix CC41 profiles in Advance Steel (Module 3)
        • 8.5.4. Many more components appear on the drawing
        • 8.5.5. Primary supports and clamping systems are missing in the Advance Steel bill of materials
        • 8.5.6. Incorrect profile when importing Sikla profiles (HEA-100 is imported)
        • 8.5.7. Components appear disconnected (ProfileWeldedTogether)
        • 8.5.8. Profiles appear in Navisworks as wireframes
        • 8.5.9. Profiles appear as triangles
        • 8.5.10. Advance Steel cannot find the Hilti profiles
        • 8.5.11. Profiles are shortened after import from Plant3D
        • 8.5.12. Views appear twisted on the drawing
        • 8.5.13. Profile positions offset after import in Advance Steel
        • 8.5.14. After the new version, I can no longer find the patcher
      • 8.6. Module 4
        • 8.6.1. Defining front view does not work correctly
        • 8.6.2. Advance Steel steelwork is not dimensioned
        • 8.6.3. The profiles from the XREFs do not appear on the drawing
        • 8.6.4. No bill of materials is created on the ortho drawing
        • 8.6.5. Components from other assemblies are also displayed
        • 8.6.6. Profiles with different lengths are listed as one item in the bill of materials
        • 8.6.7. Position label display incorrect
        • 8.6.8. When creating a drawing with Modul4, additional models are opened
        • 8.6.9. MTO on the drawing – incorrect representation of profiles
        • 8.6.10. ViewCube obscures components in orthoviews after update
      • 8.7. Module 5
        • 8.7.1. Crash in Module5
        • 8.7.2. Nuts and bolts disappear from the M4 bill of materials
    • 9. Settings
      • 9.1. Definitions
      • 9.2. Acronyms
      • 9.3. SuCri Commands
    • 10. License Manager
      • 10.1. Optimization tips
      • 10.2. Security practices
      • 10.3. Backup and Recovery
    • 11. Release notes for SuCri
      • 11.1. Current version
      • 11.2. Previous versions
      • 11.3. Coming Functions
    • 12. Appendix to the SuCri manual
      • 12.1. Technical data
      • 12.2. Recognition of third-party providers
      • 12.3. References and Sources
    • 13. Support and feedback for SuCri
      • 13.1. Error reports
      • 13.2. Function requests
      • 13.3. Subscribe to newsletter
    • 14. License agreement for SuCri
      • 14.1. Terms of Use
      • 14.2. Privacy Policy
      • 14.3. Termination and Renewal
    • 8.4.1. Problem when connecting Sikla-Pressix CC41 profiles in Advance Steel (Module 3)
    • 8.4.2. Components appear disconnected (ProfileWeldedTogether)

    4.5.22. Display Front View (SuCri4ShowSUFrontView)

    Updated on 27/08/2026

    On this page

      4.5.22. Show Front View (SuCri4ShowSUFrontView)


      Video Tutorial (currently without audio):

       


      Copyright © 2025 by IntegaDesign GmbH. All Rights Reserved.
      Back to the knowledge base

      Still a question open?

      Write to us, we answer within 24 hours on business days.

      Request a consultation

      More knowledge bases

      PiCri Rohrleitungs-Toolbox SpecCheck Rohrklassen-Validierung SuCri® Deutsch

      Newsletter

      Practical know-how on Plant 3D™, CAD engineering and automation, straight to your inbox. No spam, unsubscribe anytime.

      Thanks for registering!

      Subscribe

      Mit der Anmeldung stimmen Sie dem Erhalt unseres Newsletters zu. Widerruf jederzeit über den Abmeldelink. Privacy

      IntegaDesign GmbH

      Your specialist for CAD engineering, Plant 3D™ administration and process automation in plant design.

      Quality. Speed. IntegaDesign.

      Products & tools

      • SuCriSuCri®
      • PiCriPiCri
      • Plant 3D Content PacksPlant 3D™ Content Packs
      • Plant 3D SpecCheckPlant 3D™ SpecCheck
      • Plant 3D StahlbaukatalogePlant 3D™ structural catalogs

      Resources & engineering

      • Plant 3D™ capacity
      • Plant 3D™ project administration
      • Plant 3D™ optimisation
      • Plant 3D™ programming
      • Emergency Support

      Training & support

      • Plant 3D™ training
      • SuCri® training
      • PiCri training
      • SuCri® knowledge base
      • Downloads & whitepapers
      • Blog & insights

      Company

      • About us
      • References
      • Contact

      Legal

      • Impressum
      • Privacy
      • AGB
      • Cookie settings
      © 2026 IntegaDesign GmbH. All rights reserved.
      Otto-Hahn-Strasse 36, 63303 Dreieich, Germany