In this article, you will learn why the TurboTools may not suggest or place components and how you can fix this behavior. A correctly configured work environment is a prerequisite for the error-free function of the automation features.

Prerequisites

  • An open AutoCAD Plant 3D project.
  • Installed and licensed TurboTools.

Step-by-step instructions

  1. Actively select spec: In the Plant 3D user interface, select the desired Spec that contains the required components.
  2. Check spec: Ensure that the active Spec actually contains the relevant elements (e.g., supports or valves). If necessary, expand the spec using the Spec Editor.
  3. Run TurboTools again: Restart the TurboTools only after successfully selecting the spec.

Expected result: The matching components from the active spec are now displayed in the TurboTools tool selection and can be placed in the model.

Important notes

  • TurboTools check the active spec stored in the project to filter available components.
  • In projects with many specs, use a clear naming convention to avoid confusion.
  • If the tool selection remains empty, this is almost always an indication of a missing or incomplete spec.

Troubleshooting

If no components appear despite an active spec:

  • Check whether the components are available in the spec for the current Size.
  • Ensure that the spec is correctly linked in the Project Manager and is not read-only or corrupted.