5.1.13. SiklaOverrule, Module 2 Settings
On this page
Overview
This option activates or deactivates the manufacturer-specific overrule for supports. If it is activated, SuCri automatically adjusts the properties of the support when a parameter is changed:
- SupportType and SupportHeight: The short description, family description and size description are adjusted to the new value.
- SupportTemp: The size description, material and item code are adjusted. With SupportTemp 3, the sliding plate (parameter SLIDE_PLATE) is set to 0; with the other levels, it is set back to 1.
- Fixed point clamps: If a fixed point clamp is selected, the sliding plate is set to 0.
The change takes effect immediately after Save; a restart of Plant 3D is not necessary.
Where can I find the setting?
Open the Settings window with the command SuCriSettings or in the SuCri ribbon via the Settings button. On the left, select the Module 2 tab, then the General subtab, group Placement and overrule. There, the setting is called Sikla overrule. Apply changes with Save.
The setting only appears if the associated manufacturer data is installed. Otherwise, it is hidden, and the stored value is retained.
Values
The default value of the SiklaOverrule setting is 1.
Possible values:
- 0: Off (deactivated)
- 1: On (activated)
Example
Value 0 (Off)
Value 1 (On)
Related function
Used for the automatic property adjustment when a parameter of SupportTemp, SupportHeight or SupportType is changed; see also 4.1.6. Swapping support heights and support types and 4.1.3. Sliding plates and insert strips.
Copyright © 2026 by IntegaDesign GmbH. All Rights Reserved.